Seeed Studio Crazyflie 2.0 DWM1000 Deck
Seeed Studio Crazyflie 2.0 DWM1000 Deck is a Tag in the Loco Positioning system and measures the distance to Anchors. The distances estimate the absolute position of the Crazyflie 2.X in a room. This can then be used for autonomous flight. This product is intended to be used together with Loco Positioning Nodes and cannot be used standalone.
Features
FeaturesMeasures distances to Loco Positioning Node Anchors4 status LEDs
Electrical specificationsBased on the Decawave DWM1000 moduleImplements IEEE 802.15.4 UWB1-wire memory for automatic expansion deck detection
Ranging specificationsRanging accuracy ±10cm according to DWM1000 spec. See the wiki for measurements.Maximum tested range 10mRanging rate 500Hz, shared over all anchors. Around 80Hz per anchor with 6 anchors
Electrical specificationsBased on the Decawave DWM1000 moduleImplements IEEE 802.15.4 UWB1-wire memory for automatic expansion deck detection
Ranging specificationsRanging accuracy ±10cm according to DWM1000 spec. See the wiki for measurements.Maximum tested range 10mRanging rate 500Hz, shared over all anchors. Around 80Hz per anchor with 6 anchors
Seeed studio Newest
Seeed Studio 2-Channel CAN-BUS(FD) Shield for Raspberry Pi is designed to support the CAN FD protocol and transmission speeds of up to 8Mbps.
Date: 2019-09-24Seeed Studio BeiQi RK1808 AIoT 96Boards Compute SoM is a high-powered core board designed for the Artificial Intelligence of Things (AIoT) field.
Date: 2019-09-24Seeed Studio BeiQi RK3399Pro AIoT 96Boards Compute SoM is a powerful core board for Artificial Intelligence (AI) that can form a complete development or evaluation board.
Date: 2019-09-24Seeed Studio Grove Shield for Particle Mesh is a particle mesh breakout board with 8 onboard Grove connectors.
Date: 2019-09-24Seeed Studio BeiQi Carrier Board Kit For RK1808/RK3399Pro is an interface debugging and testing carrier board that provides interfaces for SoM board debugging and testing.
Date: 2019-09-24Seeed Studio 3D Gesture and Tracking Shield for Raspberry Pi is based on Microchip's MGC3130 chip that enables the Raspberry Pi with 3D gesture recognition and motion tracking function.
Date: 2019-09-24Seeed Studio Seeeduino Nano is a compact board similar to the Seeeduino V4.2/Arduino UNO.
Date: 2019-09-12Seeed Studio RF Explorer RFEM2.4G PLUS Expansion is an expansion board compatible with RF Explorer WSUB1G PLUS models.
Date: 2019-09-11