Schaffner FN3311 / FN3310 Power Line AC EMC/EMI Filters
Schaffner FN3311 / FN3310 Power Line AC Electromagnetic Current/Electromagnetic Interference (EMC/EMI) Filters are compact, dedicated three-phase filters for the latest generation of photovoltaic (PV) inverter topologies. FN3311 and FN3310 are designed to be installed between the PV inverter and the power grid. The filters allow solar applications to meet required emission standards. These Schaffner AC filters help ensure reliable and fault-free operation of the entire PV system. FN3311 and FN3310 are designed for use in power line connected converter and inverter applications between 250 and 2300A. The filters can also be used in general purpose motor drive applications.
Features
High current 3-phase filter up to 2300AExtremely compact and lightweight designMinimum installation footprintFN 3310 series is without Cy capacitors to ground
Specifications
Maximum continuous operating voltage3 x 520/300VAC (FN3311)3 x 520VAC (FN3310)DC to 60Hz operating frequency250 to 2300A @50°C rated current-40°C to +100°C operating temperature range40/100/21 acc. to IEC60068-1 climatic categoryFlammability corresponding to UL 94V-0
Design corresponding to UL 1283, CSA 22.2 No. 8, IEC/EN 60939, EN60721-3
Design corresponding to UL 1283, CSA 22.2 No. 8, IEC/EN 60939, EN60721-3
Applications
Power line connected converter and inverter applications between 250 and 2300AGeneral purpose motor drive
Schaffner Newest
Schaffner High-Performance Power Entry Modules (FN9262 and FN9266) are enhanced versions of the FN9260 and FN9264 filter families and feature an IEC inlet, a switch, and mains filter with very high filter attenuation.
Date: 2019-07-29Schaffner FN 3287/3288 EMC/RFI Filters are based on an innovative filter topology that provides state-of-the-art EMI attenuation.
Date: 2019-03-01Schaffner Filters for Medical Devices offer single- and dual-stage modules in an ultra-compact, user-friendly design.
Date: 2019-02-27Schaffner EMC/EMI Filters for Medical Devices offer a frequency range of 150kHz to 30MHz and a 50Ω rating.
Date: 2019-02-27Schaffner Power Line Filters for Medical Devices pass the desired input of 50/60Hz power frequency and block the flow of "noise."
Date: 2019-02-27Schaffner FN 9255 IEC C14 and C20 Inlet Filters have rated currents up to 20A and an operating voltage of 250VAC.
Date: 2018-12-11Schaffner EMC/EMI Components for Medical Devices offer a 250 to 3000VAC voltage range and a 1 to 2300A rating, depending on the model.
Date: 2018-05-01Schaffner FN2000 Series AC/DC EMI Filters are available at Mouser and feature exceptional attenuation performance in a compact size.
Date: 2017-08-22